UFESA BS Rock Crystal 70205733 Manual De Instrucciones página 17

ASSEMBLY INSTRUCTIONS
How to remove/attach the jar lid (A):
1. To remove the jar lid, slightly move the lid fastening clip (A1) to the right. The lid handle
(A2) will be released, then pull it out.
2. To attach the jar lid, align the lid flange (A3) with the jar spout (C1) and press it down until
positioned. Then press down the lid handle (A2). It will "click" into lid fastening clip (A1).
Note: The jar lid must be closed well in position, otherwise, the appliance cannot be activated.
How to remove/attach the measuring cup (B):
The measuring cup allows quick measurement of 20/30/40ml, ideal for some preparations:
1. To remove the measuring cup, turn it counter-clockwise and pull it out.
2. To attach the measuring cup, align the measuring cup flanges, press it down and turn it
clockwise. It will "click" into position.
How to place the jar (C):
Hold the jar with the handle on its right side, place it into the motor unit (D) and turn it cloc-
kwise until the lock mark. It will "click" into place. Lift the jar to check whether it is locking
or not. To remove the jar, repeat the operation in reverse.
INSTRUCTIONS FOR USE
Blending with speed knob
1. Lay the appliance on a flat horizontal surface and make sure it is unplugged.
2. Pour in the ingredients. The jar (C) is graduated with different weight marks for an easy
use.
Weight mark 1
Weight mark 2
Weight mark 3
Weight mark 4
Weight mark 5
Weight mark 6 (MAX)
The amount of mixture should never exceed the maximum capacity as indicated on the jar.
Note: Never use hot liquids or run the appliance empty.
3. Place the jar lid (A) and measuring cup (B) well in position. Please refer to the above
section from this manual.
ML
500 0.5
750 0.75
1000
1250 1.25
1500 1.5
1750 1.75
L OZ
16
24
1 32
40
48
59
CUPS
2
3
4
5
6
7.4
17