en operation
After preparing the drink, the milk
system will automatically clean it-
self with a short jet of steam.
Tip: If you want to stop the dispens-
ing process early, press
want to stop the dispensing process
altogether, press
8.7 Dispensing special drinks
Your appliance has other drinks be-
sides the ones that you can obtain
via the quick-selection buttons.
Press
several times.
▶
→ "Drinks overview", Page 49
8.8 Dispensing milk froth
WARNING
Risk of burns!
The milk system can become ex-
tremely hot.
▶
Never touch the milk system when
it is hot.
▶
Allow the hot milk system to cool
down before touching it.
Requirements
The milk tube is connected.
¡
The suction pipe is connected.
¡
Insert the suction pipe in the milk,
1.
e.g. Tetra Pak carton.
Place your pre-warmed cup under
2.
the outlet system.
Press
repeatedly until the dis-
3.
play shows "Milk froth".
Change the setting if necessary:
4.
To adjust the per-cup quantity,
‒
press
.
→ "Adjusting the amount",
Page 57
Press
.
5.
The milk froth will run out of the
a
outlet system.
Press
to stop the dispensing
6.
process.
56
. If you
.
8.9 Dispensing hot water
WARNING
Risk of burns!
The milk system can become ex-
tremely hot.
▶
Never touch the milk system when
it is hot.
▶
Allow the hot milk system to cool
down before touching it.
Note: If the milk system has not been
cleaned, small amounts of milk may
be dispensed with the water.
Requirements
The milk system has been
¡
cleaned. .
The milk tube has been removed.
¡
Place your pre-warmed cup under
1.
the outlet system.
Press
repeatedly until the dis-
2.
play shows "Hot water".
Change the setting if necessary:
3.
To adjust the per-cup quantity,
‒
press
.
→ "Adjusting the amount",
Page 57
Press
.
4.
If the following message appears:
"Please remove suction hose.", re-
move the milk tube and press
Hot water will run out of the outlet
a
system.
Press
to stop the dispensing
5.
process.
8.10 Drink settings
Prepare a drink according to your
taste.
Adjusting the coffee strength
Press the symbol for your desired
1.
drink.
To select the strength of the cof-
2.
fee, press .
.