Descargar Imprimir esta página

Schneider Airsystems A 888 007 Manual De Instrucciones Original página 45

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Problem
L
Unusual
running
noises.
M The tank for the
water
separator
with filter is full of
condensate
2.9
Flow diagram
01
Electric motor
02
Compressor unit
03
Check valve
04
Safety valve
05
Dirt arrester
06
Vessel
07
Pressure gauge (vessel pressure)
08
Pressure reducer
09
Pressure gauge (working pressure)
10
Compressed air connection (cleaned
compressed air)
11
Water separator with filter
12
Compressed
pressed air with oil vapour)
13
Mist oiler
14
Condensate evaporator
15
Throttle (adjustable)
16
3/2-way valve
17
Throttle
18
Pressure switch
(Figure 16a)
Cause
V-belt sags.
Mechanical defect on the com-
pressor unit
Mechanical defect in the motor
Attached parts loose
Fan wheel rubs against the
mounting or is loose
The float divertor filter element
is dirty.
air
connection
(com-
Remedy
X
Tighten
Chap. 2.6.9)
X
Notify Schneider Druckluft Ser-
vice
X
Notify Schneider Druckluft Ser-
vice
X
Tighten attached parts.
X
Check the mounting or seat of
the fan wheel or tighten fan
wheel.
X
Clean
Chapter 2.6.8)
2.10 Spare parts service
Visit
our
website
tems.com/td/ for the latest version of all ex-
ploded drawings and spare parts lists for our
products. If you have any special questions,
please consult the Schneider Airsystems Ser-
vice centre in your country (addresses in the
service appendix) or your local dealer.
2.11 Warranty conditions
Basis for warranty claims: complete unit
in original condition/proof of purchase.
According to legal provisions, you re-
ceive the following warranty against
material and manufacturing defects:
private use only: 2 years,
commercial use: 1 year.
Excluded warranty claims: Wear/consum-
able parts; improper use; overload; manipu-
lation/use for other than intended use;
insufficient/incorrect/no maintenance; accu-
mulation of dust/dirt; incorrect/impermissi-
ble work methods; failure to observe the
Instruction Manual; incorrect processing/
working materials; incorrect electrical con-
nection; improper installation.
MAS Silent
the
V-belt
filter
element
www.schneider-airsys-
GB
(see
(see
II/21

Publicidad

loading

Este manual también es adecuado para:

Mas 500-10-60 d-silentA 888 013A 888 018