Publicidad
Idiomas disponibles
Idiomas disponibles
Control channel 4 – Macros
Decimal Hexad. Percentage S/F
0 39
00 27
0% 15%
40 99
28 63
16% 39%
100 119 64 77
39% 47%
120 139 78 8B 47% 55%
140 159 8C 9F
55% 62%
160 179 A0 B3 63% 70%
180 199 B4 C7 71% 78%
200 219 C8 DB 78% 86%
220 239 DC EF 86% 94%
240 255 F0 FF 94% 100%
CLEANING AND MAINTENANCE
The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tighly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) Mechanically moved parts like axles, eyes and others must not show any traces of wearing (e.g. material
abrading or damages) and must not rotate with unbalances.
4) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
The lens has to be replaced when it is obviously damaged,
so that its function is impaired, e. g. due to cracks or deep scratches!
The objective lens will require weekly cleaning as smoke-fluid tends to building up residues, reducing the
light-output very quickly. The cooling-fans should be cleaned monthly.
The interior of the fixture should be cleaned at least annually using a vacuum-cleaner or an air-jet.
The dichroic colour-filters and the internal lenses should be cleaned monthly.
To ensure a proper function of the rotating parts, we recommend lubrication in six month intervals. The
quantity of oil must not be excessive in order to avoid that oil runs out when parts rotate.
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Please refer to the instructions under "Installing/Replacing the lamp".
S No function
S Reset
S Macro 1
S Macro 2
S Macro 3
S Macro 4
S Macro 5
S Macro 6
S Macro 7
S Macro 8
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
Feature
CAUTION!
29/58
51837556_V_1_1.DOC
Publicidad
