Descargar Imprimir esta página

Futurelight EVO-3 Manual Del Usuario página 30

Efecto luminoso

Publicidad

Idiomas disponibles

Idiomas disponibles

Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Open the fuseholder on the rearpanel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
DMX-control-channels:
DMX-512-connection:
Sound-control:
Dimensions (LxWxH):
Weight:
Maximum ambient temperature T
Maximum housing temperature T
Min.distance from flammable surfaces:
Min.distance to lighted object:
Fuse:
Accessory:
Topspot HIT 150W G-12 6000h 4200K nw
OSRAM HSD 150/70 G-12 7000K 2000h
PHILIPS CDM-T 150W/830 G12 3000K
PHILIPS CDM-SA/T 150W/942 G12 4200K,6000h
FUTURELIGHT Easy-1 remote control
FUTURELIGHT EX-6/32 controller
FUTURELIGHT EX-8/32 controller
FUTURELIGHT CP-240 controller
FUTURELIGHT CP-256/64 controller 16bit
FUTURELIGHT CP-512/64 controller 16bit
Wizard-512 USB DMX-Software + Interface
Wizard-1024 USB DMX-Software + Interface
FUTURELIGHT DES-3 DMX-terminator 3-pin
Please note: Every information is subject to change without prior notice. 12.10.2006 ©
230 V AC, 50 Hz ~
225 W
4
3-pin XLR
via built-in microphone
335 x 300 x 295 mm
8.5 kg
:
45° C
a
(steady state):
60° C
B
0.5 m
0.5 m
T 3 A, 250 V
No. 91201797
No. 89101910
No. 91014045
No. 91014046
No. 51834010
No. 51834046
No. 51834047
No. 51834265
No. 51834288
No. 51834295
No. 51860102
No. 51860110
No. 51834001
30/58
51837556_V_1_1.DOC

Publicidad

loading