Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
AA
1. Remove the pre-assembled M6 flange nut
Item
Description
(AA) from handle (A), attach handle (A) to
mesh lid (B) using the M6 flange nut (AA). Then
AA
M6 Flange Nut (pre-assembled on part A)
use wrench (BB) to fully tighten.
BB
Wrench
2. Place the fire bowl (D) on the body (E). Place
the log rack (C) into the fire bowl (D).
D
E
F
BB
A
C
B
3. Place the mesh lid (B) on the fire bowl (D).
Note: please don' t cover the lid while
operating the fire pit. The correct use for the
mesh lid is put it cover the fire pit when the
log fire turns to charcoal fire.
C
F
OPERATION
CAUTION
removed from the firepit.
To light
1 . P lace a layer of dry kindling or a natural
firestarter onto the center of the log rack.
2 . P lace above that a layer of dry seasoned
hardwood that is cut to lengths no more
than 3/4 the width of the firebowl.
3 . U se a long match to light kindling.
To extinguish
1 . A llow fire to burn itself out.
CAUTION
extinguish as this is dangerous and can cause
damage to the firepit.
Tending the fire
1 . W hile using fire poker (G), shift embers/
wood logs to allow additional airflow.
2 . W ait until glowing embers have developed
before adding any additional wood. If
additional wood is required, place wood on
top of coals. Be careful not to shift ashes.
3 . P lease don't close mesh lid until the log fire
turns to charcoal fire.
7
Make sure all debris is
DO NOT use water to
Publicidad
