Descargar Imprimir esta página

Levenhuk Wezzer PRO LP300 Guia Del Usuario página 13

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 48
Time
Tap the TIME area of the screen to adjust the time settings.
At first tap, the + and − buttons will flash. Use them to adjust the screen contrast level from 0 to 8 (5 is the
default).
When you tap again, set your time zone.
With the third tap, select the time format: 12-hour or 24-hour.
With the fourth tap, set the hour.
With the fifth tap, set the minutes.
Date
Tap the DATE area of the screen to configure date and alarm settings.
When tapped for the first time, the + and − buttons will flash. Use them to switch the display between alarm
time, date, and day of the week.
When tapped again, switch the date format between DD-MM and MM-DD.
With the third tap, set the year.
With the fourth tap, set the month.
With the fifth tap, set the day.
With the sixth tap, set the alarm hour.
With the seventh tap, set the alarm minute. Hold the buttons to change the value faster. Use the ON/OFF
button to turn the alarm function on or off.
Memory
Tap the MEMORY area of the screen to set up the recorded data display.
At first tap, the + and − buttons will flash. Use the − button to view earlier weather data (with timestamp),
the + button to view more recent data.
When you tap it again, CLEAR and the memory full icon will flash. Press the memory icon for 3 seconds
to clear the data.
Factory reset
If you have issues with the weather station or outdoor multisensor, perform a factory reset.
In normal mode, press and hold the + button for 20 seconds to reset all of the settings to the factory defaults.
To reset the outdoor multisensor, use the RESET button on the sensor body or reinstall the batteries.
Specifications
Atmospheric pressure, units of measurement
Atmospheric pressure measurement range
Air humidity, units of measurement
Humidity measurement range (indoors, outdoors)
Temperature, units of measurement
Temperature measurement range (indoors)
Temperature measurement range (outdoors)
Anemometer, units of measurement
Wind speed measurement range
Rain gauge (precipitations), units of measurement
Precipitations measurement range
Screen
Time format
Radio signal frequency
Radio signal radius
Transmission signal
Power supply (base station)
Power supply (multisensor)
The manufacturer reserves the right to make changes to the product range and specifications without prior
notice.
hPa, inHg, mmHg
300−1100hPa, 8.85−32.5inHg, 225−825mmHg
% (RH)
10−99%
°C, °F
0... +50°C (+32... +122°F)
−40... +60°C (−40... +140°F)
m/s, km/h, mph, knots
0−50m/s, 0−180km/h, 0−112mph, 0−97 knots
mm, in
0−9999mm (0−393.6in)
touchscreen monochrome LCD
24 hours, 12 hours
433MHz
100m (328ft.) (in an open area)
48s (indoors/outdoors)
3pcs alkaline AA batteries
2pcs alkaline AA batteries
13

Publicidad

loading

Este manual también es adecuado para:

82933