Volvo DIGITAL REAR-VIEW MIRROR Guia Del Usuario página 4

DIGITAL REAR-VIEW MIRROR
General information and initial
en-GB
adjustments
The digital rear-view mirror can be used as
a mirror or a display. Switch between mirror
mode and camera display mode by flicking the
switch in the middle.
The display mode shows the view from a
camera located in the rear of the car.
All of the controls for the display mode are
located on the mirror.
IMPORTANT
You should always adjust both the mirror
itself and the camera in the rear before
driving to make sure that you have good
visibility of what's behind you.
4
Switching between the modes
Push the switch in the middle away from you
to enter mirror mode.
Pull the switch in the middle towards you to
enter camera display mode.
Display settings
There are two types of display settings that
you can change. You can adjust the brightness
and the view.
Switch between these settings by pressing the
settings button.