Publicidad
Idiomas disponibles
Idiomas disponibles
The air conditioning will automatically stabilize the room temperature on the selected
temperature.
When using the "auto" function, you can't select the fan speed.
COOL mode
The unit will cool with this setting.
Press the "mode" touch until the "cool" indication light turns on. Use the arrow touches to
select the desired room temperature. Use the "fan" touch to select the desired air speed.
DRY mode
This function is used to dehumidify the air.
Press the "mode" touch until the "dry" indication light turns on. With the selection you
can't select the temperature or fan speed. Keep windows and doors closed for an optimal
dehumidification. It is not necessary to install the air outlet hose with this function.
FAN-mode
Press the "mode" touch until the fan indication light will turn on. Press the "fan" touch to select
the air speed. This function allows you to use the unit as a fan, which means the temperature
cannot be set. It is not necessary to install the air outlet hose with this function.
6.
TIMER touch
1. With this function you can select when the unit must turn on or off.
• Pressing the 'timer' button when the device is switched off turns on automatic switch-on.
The 'timer on' indicator light will come on.
• Pressing the 'timer' button when the device is switched on turns on automatic switch-off.
The 'timer off' indicator light will come on.
2. Use the '+' and '-' keys to set the desired time. The maximum time selection is 24 hours.
3. After finishing the selection, the time will start to countdown on the display until "auto on"
or "auto off", depending on the selection you made.
You can cancel the timer function at any time by pressing the "on/off" touch.
When the error code E1 or E2 is displayed, the timer selection will be cancelled.
7.
SWING touch
This button activates the automatic movement of the lid at the top, which will constantly change
the airflow due to oscillation.
8.
FOLLOW ME indicator light
If you set the FOLLOW ME function, this indicator light will illuminate. You can only activate this
function with the remote control. (see p.80).
9. LED display
Will show the temperature and timer selections. When the "dry" or "fan" mode is selected, the
display will show the room temperature.
www.domo-elektro.be
77
Publicidad
