WIMIUS Q2 Manual Del Usuario página 9

support01@wimius.com
Manual Keystone Correction
Select [Settings] menu -- Select [Projection] -- Select [Keystone
Correction]--Select [Manual Keystone Correction], press "OK" to pick the
point you want to adjust at first, and then press the button " ▶ " or " ▼ " to
set the value (Horizontal and Vertical ±30°) needed as shown below.
Initial Angle Correction
Place the device on the horizontal plane and press the OK to correct it.
Don't move the device during the correction.
EN
7