Publicidad
Idiomas disponibles
Idiomas disponibles
Connecting the hob to the mains power supply
The power supply should be connected in compliance with the relevant standard
via a single-pole circuit breaker. The method of connection is shown below.
1. If the cable is damaged or needs replacing, this should be done by an
after-sales technician using the proper tools, so as to avoid any accidents.
2. If the appliance is being connected directly to the mains supply, an omnipolar
circuit breaker must be installed with a minimum gap of 3mm between the
contacts.
3. The installer must ensure that the correct electrical connection has been made
and that it complies with all local safety regulations.
4. The cable must not be bent or compressed.
5. The cable must be checked regularly and only replaced by a properly qualified
person.
GUARANTEE
Your product is guaranteed for a period of 12 months from the date of original
purchase. If any defect arises due to faulty materials or workmanship, the
appliance will either be repaired where applicable, replaced or refunded at the
discretion of the retailer.
The following conditions apply :
The product must be returned to the retailer with original proof of purchase.
•
It must be used only for domestic purposes.
•
It does not cover wear and tear, damage, misuse or consumable parts.
•
We accept no responsibility for accidental or consequential loss or damage.
•
24
Publicidad
