Euromex EduBlue BlueLine Serie Manual Del Usuario página 10

Idiomas disponibles

Focusing

With the focusing knobs (D) the object can be sharply focused. The working distance (distance between front of

objectives to top of object) is about 60 mm

Safety device (on pillar versions)

The fixing screw (N) locks the stand arm into its position. When loosening the fixing screw, one can adjust the holder

in height depending of the volume/height of the object. After adjustment the fixing screw should be tightened again

and the safety device (O) repositioned and secured in order to avoid that the arm stand can fall down unexpectedly

Revolver of Dual Magnification models

The models with two magnifications are equipped with two pairs of achromatic objectives mounted in one revolver

(objective changer). By turning this revolver another magnification is set. Turn the nosepiece untill it clearly "clicks"

into position

Revolver of Triple Magnification models

The models with three magnifications are equipped with three pairs of achromatic objectives mounted in one

revolver (objective changer). By turning this revolver another magnification is set, turning it again selects the next

magnification. Turn the nosepiece untill it clearly "clicks" into position

Moveable object stage (EVO models only)

The build-in moveable object stage can easily be adjusted and

rotated in all directions

Maintenance and cleaning

Always place the dust cover over your EduBlue stereomicroscope

after use. Always keep the eyepiece mounted on the

stereomicroscope to avoid dust entering the instrument

Cleaning the optics

When the eyepiece lens are dirty, they can be cleaned by wiping a piece of lens paper over the surface (circular

movements). When this does not help put a drop of alcohol on the lens paper and wipe it. Never put xylol or alcohol

directly on the lens! Please note that Euromex offers a special microscope cleaning kit: PB.5275

It is not necessary – and not recommended – to clean the lens surfaces at the inner side of the objectives. Sometimes

dust can be removed with high pressured air