Euromex EduBlue BlueLine Serie Manual Del Usuario página 7

Idiomas disponibles

Preparing the EduBlue stereomicroscope for use

Carefully remove the items from its packaging and place them on a flat, firm surface. Please do not expose the

stereomicroscope to direct sun light, high temperatures, damp, dust or acute shake. Make sure the table or surface is

flat and horizontal. When moving the stereomicroscope, use the left hand to hold the transport handle and hold the

base of the stereomicroscope with the right hand

Hold the stereomicroscope at the top of the

Pillar or handle when it should be moved

Holding the stereomicroscope by

its focusing knob will damage the

stereomicroscope

Caution! If the bacterial solution or water splatters

over the stage plate, objective or head, pull

out the power cord immediately and dry the

stereomicroscope

Assembling Steps

Euromex Microscopes BV always try to keep the number of assembly steps for their customers as low as possible but

in some cases there are some steps to be taken. The steps mentioned below are often not necessary but described for

your convenience nonetheless

Placing the eyepieces

The microscopes are equipped with WF10x eyepieces

(A) which are locked with a screw. In case alternativ

eyepieces are to be installed into the microscope;

please unlock the screw first before taking out the

eyepiece. This is to prevent damage to the tube(s)

Locking the eyepieces

To lock the eyepieces please find the screw as indicated

in picture (A). Please note that location can be slightly rotated from model to model