Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
or with damaged or missing parts could result in serious
personal injury.
If any parts are damaged or missing, please call 1-800-525-2579 for assistance.
WARNING:
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict serious injury.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Hearing protection may also
be required depending on the type of attachment used
and as prescribed elsewhere in this Operator's Manual.
Failure to do so could result in objects being thrown into
your eyes and other possible serious injuries.
WARNING:
Do not use any attachments or accessories not
recommended by the manufacturer of this product. The
use of attachments or accessories not recommended
can result in serious personal injury.
APPLICATIONS
You may use this product for the purposes listed below:
„ Driving screws with screwdriver bits
„ Light-duty drilling
INSTALLING/REMOVING BATTERY PACK
See Figure 1, page 9.
To install:
„ Turn the battery cap counterclockwise to unlock and
remove.
„ Insert the battery pack into the product as shown.
„ Align the grooves in the cap with the tabs on the end of
the tool.
„ Place the cap over the battery pack and push down.
ASSEMBLY
WARNING:
Do not attempt to modify this product or create acces-
sories or attachments not recommended for use with this
product. Any such alteration or modification is misuse
and could result in a hazardous condition leading to
possible serious personal injury.
OPERATION
„ Turn the battery cap clockwise to lock in place.
NOTE: Do not attempt to use this product if the battery
cap is not securely closed.
To remove:
„ Turn the battery cap counterclockwise to unlock and
remove.
„ Remove the battery pack from the tool.
For complete charging instructions, see the operator's manu-
als for your battery pack and charger.
WARNING:
Battery products are always in operating condition.
Therefore, the switch should always be locked when not
in use or carrying at your side.
LED INDICATOR FUNCTIONS
See Figure 1, page 10.
When a charged battery pack is installed in the tool, the
LED indicator will show the status of the battery when the
tool is powered on.
BATTERY STATUS
Battery Level < 25%
Low Battery
Excessive Force
Over Temperature
HIGH TEMPERATURE PROTECTION
This tool is equipped with a high temperature protection
feature that automatically deactivates the tool when it is
overheated. To resume operation, allow the tool to cool and
then turn the tool on.
6 - English
LED LIGHT SCENARIO
Normal
Solid Green (No Flashes)
Solid Red (No Flashes)
Flashing Red (3 Flashes)
Flashing Red (6 Flashes)
Flashing Red (9 Flashes)
Publicidad
