Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
ES
UNPACKING THE BOX
After opening the box, remove all parts and compare them with the
following list of included components:
PT
1. Gun bracket
2. Switch
3. Detergent adjustment valve 4.
EN
4. Gun base
5. Adjustable nozzle
6. Gun
FR
7. Cleaning needle
8. High pressure hose
9. Water inlet connector
10. Power cable hook
Due to transport and packaging, some of the accessories may be
delivered disassembled. Please follow the assembly instructions.
ASSEMBLY
STEP 1
Install the gun bracket (1) and the power cable hook (10) firmly on the
main body as shown in the figure.
Instruction manual
STEP 2
Insert the gun base and screw it firmly into the main body as shown
in the figure.
STEP 3
Insert the adjustable nozzle (5) into the gun. Press and rotate the
adjustable nozzle clockwise onto the gun (6) until it is hand tight to
secure it in place. When the parts are properly joined, you cannot
separate the two components by pulling straight off the adjustable
nozzle. All accessories must be inserted into the gun for proper use.
STEP 4
Connect the high pressure hose (8) to the gun (6). Insert and connect
quickly and tightly to prevent leakage. When the parts are correctly
connected, you will not be able to separate the two components by
pulling straight out from the gun (6). Press the hose lock button, then
you can remove the pressure washer.
STEP 5
Connect the high pressure hose (8) to the water outlet of the high
pressure cleaner. Insert and connect it quickly and tightly to avoid
leakage. When the parts are correctly connected, you cannot separate
the two components by pulling straight out from the water outlet. Press
the "Button" in the direction of the arrow, then you can remove the high
pressure hose.
20
ref. 08473
Publicidad
