Publicidad
Idiomas disponibles
Idiomas disponibles
4. LED display
Will show het temperature selections. When the "dry or "fan" mode is selected, the display will show the
room temperature.
REMOTE CONTROL
When using the remote control make sure that you always aim
it towards the apparatus. If you don't do this, you can briefly
aim the remote control towards the apparatus and press the
ON-OFF button.
When the apparatus receives a signal of the remote control you
hear a beep. The remote control must be used within an eight-
metre radius around the apparatus.
Batteries
·
The remote control works with 2 AAA batteries (R03/LR3).
·
Remove the cover of the batterie compartment, by pressing
down on it and sliding it out of the remote.
·
Place the batteries, make sure to follow the indications +
and – indicated in the batterie compartment.
·
Place the cover back on the batterie compartment.
·
NOTE : When removing the batteries all selections will be
deleted. When placing new batteries you have to reinstall all
the selections.
1. ON/OFF touch
To turn the unit off or on.
2. MODE- touch
With this touch you can select the desired function. Every time when pressing this touch the function will
change: COOL – DRY – FAN. The related indication light will turn on on the control panel.
3. FAN touch
With this touch you can select the fan speed: LOW
4. SLEEP touch
You can use this touch for activating the "sleep" mode.
When pressing the "sleep" touch, the selected temperature will be elevated with 1 °C after 30 min. After
another 30 min the temperature will increase with another 1°C. The air conditioning will maintain this
temperature for 7 hours. After this time, the air conditioning will go back to the original set temperature
and the "sleep" function will end.
NOTE: this function cannot be selected with the "fan" or "dry" function.
62
DO10161
Remote LED Screen Indicators
Remote LED Screen Indicato
Transmission Indicator
Lights up when remote sends
signal to unit
MODE display
MODE display
Displays the current
mode, including:
Displays the current
1
mode, including:
AUTO
2
COOL
AUTO
3
COOL
DRY
HEAT
DRY
4
FAN
HEAT
FAN
FAN SPEED display
FAN SPEED display
Displays selected FAN SPEED:
Displays selected FAN SPEED:
HIGH,
or
LOW
– HIGH
or
LOW
This display is blank when
set to AUTO speed.
This display is blank when
set to AUTO speed.
Transmission Indicator
Lights up when remote sen
signal to unit
ON/OFF display
ON/OFF display
Appears when the unit is turne
Appears when the
and disappears when it is turne
and disappears wh
TIMER ON displa
Displays when TIM
ON is set
5
MED,
HIGH,
MED,
– AUTO.
Temperature/T
Displays the se
when using TIM
This display is b
6
7
TIMER
8
Displa
ON is
9
SILENT
Not availa
Tem
Dis
whe
Temperature
T
Timer setting
T
Thi
5 5
Publicidad
