Wireless Receiver Operation; Functions Of Buttons And Displays - Mitsubishi Electric ecodan PAR-WT50R-E Manual De Instalación Y Configuración

7. Wireless Receiver Operation

The wireless receiver is powered by indoor unit. It communicates with the wireless remote
controller(s), and transmits to the indoor unit the operation status and commands received from
the wireless remote controlle(s). The wireless receiver has two modes available: pairing mode
and pairing reset mode.

7.1. Functions of Buttons and Displays

Number
Setting button
Communication LED (green)
Operation LED (orange)
The following table shows the operating and illuminating status of the LEDs.
Operation LED
(orange)
Blinking
Off
Off
Off
Blinking
Blinking
Blinking
On
Item
Communication LED
(green)
Blinking
Off
On
Blinking
Off
On
Blinking
On
Top view
Front view
Description
To switch operating mode.
To indicate that the wireless re-
ceiver is communicating.
To show operating status of the
wireless receiver.
Description
Power is ON (for 3 seconds).
Normal mode: Not paired
Normal mode: Paired
Normal mode: Communicating
Performing a pairing process
Pairing: Successful
Pairing: Unsuccessful
Pairing information is cleared.
16