Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
once the selected time has elapsed.
-
Press the light button to turn the fan's lamp on and off.
-
The remote control requires 2 x 1.5 V-3AAA batteries.
Winter Function
Press button 3. The fan will make air flow from the bottom upwards, bringing cold air to the
top of the room.
Summer Function
Press button 4. The fan will make air flow from the top downwards, bringing cold air to the
bottom of the room.
Natural breeze
Activate this mode by pressing the corresponding button on the remote control. The fan will
run at different power levels in a cycle, producing a feeling of fresh air.
Warning:
Invert the spinning direction of the fan while in operation. Hold down the button for approx. 3
seconds, the device will beep, and the blades will start slowing down until they practically stop
spinning. After a few seconds, they will start spinning again in the opposite direction.
Pairing the remote control with the fan
Press the power button for 5 seconds until you hear a beep.
Wi-Fi connection
Press the 1h and 4h button simultaneously for 5 seconds until you hear a beep. Follow the
instructions in section 5. Wi-Fi connectivity and mobile App.
Warnings:
-
The remote control operates through RF Wireless digital transmission technology. If both
the fan and the lamp are equipped with a switch, turn on the fan at top speed and turn the
light on before using the remote control.
-
If the fan or the light cannot be controlled through the remote control, check if the batteries
in the remote control are in good conditions and if they make good contact, that the positive
and negative electrodes are in the correct position, and if the batteries are charged.
-
If the fan or the light cannot be controlled through the remote control, check if there are
other remote-controlled products in the same area and check if the transmitter buttons
are pressed. Product with similar remote-control systems may cause interference. This
does not include infrared remote controls.
-
Pay attention to the product voltage. Too low a voltage may cause the remote control to
not work. The technical specifications are indicated in this manual.
-
If the remote control is not going to be used for a long time, remove the batteries.
44
ENERGYSILENCE AERO 5500 WHITE AQUA CONNECTED
ENERGYSILENCE AERO 5500 BLACK AQUA CONNECTED
5. WI-FI CONNECTIVITY AND MOBILE APP
In order to link your product with our App, please follow the steps below.
Automatic-scanning mode:
Download the Cecotec app from Google Play or the App Store.
1.
2.
If it is the first time you use it, register an account. If not, log in.
3.
Once you have entered the App, tap "+" on the top right-hand corner and tap "Air
Treatment".
In the upper-right corner, tap on "Auto Scan", then long press the 1h and 4h buttons on the
4.
remote control for 5 seconds until the remote control beeps.
5.
The device will appear on the display–tap on it.
6.
Enter the password of the Wi-Fi the mobile device is connected to and select "confirm".
Remember that the network must be 2.4 GHz.
7.
Wait for the connection to complete.
Manual-connection mode:
Download the Cecotec app from Google Play or the App Store.
1.
2.
If it is the first time you use it, register an account. If not, log in.
3.
Once you have entered the App, press "+" on the top right-hand corner and tap "Aqua
Connected".
Turn on your device, you must make sure that you do not have any mode selected by
4.
pressing the power button, the air conditioner will go into standby mode. Then press the
button for about 5 seconds, the Wi-Fi indicator will start blinking. If the indicator blinks
slowly, this operation must be repeated.
Enter your Wi-Fi password and press confirm. Remember the Wi-Fi network must be 2.4
5.
GHz.
6.
Then, pairing will start automatically.
6. CLEANING AND MAINTENANCE
-
Make sure to disconnect the fan before cleaning it.
-
Do not immerse any of the parts of the device in water or splash them with any other liquid.
-
Do not use solvents or any other chemical products for cleaning it.
-
Use a soft, damp cloth to clean the surface of the device.
ENGLISH
ENERGYSILENCE AERO 5500 WHITE AQUA CONNECTED
ENERGYSILENCE AERO 5500 BLACK AQUA CONNECTED
45
Publicidad
