Evolution F255 SMS Instrucciones Originales página 4

SAFETY LABELS & SYMBOLS
(1.8)
WARNING: Do not operate this machine
if warning and/or instruction labels are
missing or damaged. Contact Evolution
Power Tools for replacement labels.
Note: All or some of the following symbols
may appear in the manual or on the product.
Symbol Description
V
Volts
A
Amperes
Hz
Hertz
min (RPM)
-1
Speed
~
Alternating Current
n
No Load Speed
o
Wear Safety Goggles
Wear Ear Protection
Do Not Touch,
Keep hands away
Wear Dust Protection
Wear Hand Protection
CE certification
Waste Electrical and
Electronic Equipment
Read Manual
WARNING
Laser Warning
Double Insulation Protection
Fuse
Triman - Waste Collection
& Recycling
www.evolutionpowertools.com
INTENDED USE OF
THIS POWER TOOL
WARNING: This product is a Multi-material
sliding mitre saw and has been designed
to be used with genuine Evolution blades
rated for this machine. Only use blades
designed for use in this machine and/
or those recommended specifically by
Evolution Power Tools Ltd.
WHEN FITTED WITH A CORRECT BLADE
THIS MACHINE CAN BE USED TO CUT:
• Wood, Wood derived products
(MDF, Chipboard, Plywood, Blockboard,
Hardboard etc),
• Wood with nails,
• 50mm mild steel box section with 3mm wall
at HB 200-220,
• 3mm mild steel plate at HB 200-220.
Note: Wood containing non galvanised nails or
screws, with care, can be safely cut.
Note: Not recommended for cutting
galvanised materials or wood with embedded
galvanised nails. Cutting galvanised steel may
reduce blade life.
PROHIBITED USE
OF THIS POWER TOOL
WARNING: This product is a Multi-material
sliding mitre saw and must only be used as
such. It must not be modified in any way,
or used to power any other equipment or
drive any other accessories other than those
mentioned in this Instruction Manual.
WARNING: This product is not
(1.13)
intended for use by persons (including
children) with reduced physical, sensory or
mental capabilities, or lack of experience
and knowledge, unless they have been
given supervision or instruction concerning
the safe use of the product by a person
responsible for their safety and who is
competent in its safe use.
SAFETY PRECAUTIONS
ELECTRICAL SAFETY
(1.14)
This machine is fitted with the correct moulded
plug and mains lead for the designated market.
If the supply cord is damaged, it must be
replaced by a special cord or assembly available
from the manufacturers or its service agent.
4