Baofeng UV-5RM PLUS Manual De Instrucciones página 21

Appendix B. - Shortcut Menu operations
Name
MENU
(Full Name)
SQL
0
- Squelch Level
STEP
1
–Step Frequency
TXP
2
– Transmit Power
SAVE
3
- Battery Save
VOX
4
– Voice Operated TX
WN - Wideband /
5
Narrowband
ABR - Display
6
Illumination Time
TDR - Dual Watch, Dual
7
Reception
8 BEEP - Keypad Beep
Settings
[0 - 9]
Setting the squelch to 0 will open up the squelch
entirely.
2.5K[0] | 5.0K[1] | 6.25K[2] |
10.0K[3] | 12.5K[4] | 20.0K[5] |
25.0K[6] | 50.0K[7]
HIGH [0] | LOW [1]
OFF [0] | 1 | 2 | 3 | 4
OFF [0] | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10
WIDE [0] | NARR [1]
ON [0] | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10
OFF [0] | ON [1]
OFF [0] | ON [1]
Description
Squelch silences the receiver when there is no signal.
Selects the amount of frequency change in
VFO/Frequency mode when scanning or pressing the
/ keys.
Selects between HIGH and LOW transmitter power
when in VFO/Frequency mode. Use the minimum
transmitter power necessary to carry out the desired
communications.
Selects the ratio of sleep cycles to awake cycles (1:1,
2:1, 3:1, 4:1). The higher the number the longer the
battery lasts. The higher number increases the RX sleep
cycle, but you may miss the first few syllables before
the RX opens.
When enabled it is not necessary to press the [PTT] key
on the transceiver. Adjust the gain level to an
appropriate sensitivity to allow smooth transmission.
Wideband (25 kHz bandwidth) or narrowband (12.5
kHz bandwidth).
Time-out for the LCD backlight. (seconds)
Monitor [A] and [B] at the same time. The display with
the most recent activity ([A] or [B]) becomes the
selected display
Allows audible confirmation of a key press