Vortice VORT T Manual De Instrucciones página 8

ENGLISH
ELECTRICAL CONNECTIONS
FAN SIGNAL OUTPUT 0-10V
1 = POWER 220-240 Vac
2 = POWER 220-240 Vac
3 = Pr2 ... TEMPERATURE PROBE
4 = GND ... TEMPERATURE PROBE
5 = Pr1 ... ANEMOMETER PROBE
6 = GND ... ANEMOMETER PROBE
7 = NO ... NO CONTACT FOR REVERSE ROTATION
8 = C ... COMMON FOR REVERSE ROTATION
9 = NC ... NC CONTACT FOR REVERSE ROTATION
18 = GND- ...-0 FAN SIGNAL OUTPUT
19 = +10V ... +10Vcc SIGNAL OUTPUT
INSTRUCTIONS FOR START-UP
The unit switches to B mode when it is powered. (See a description of modes A and B
below).
The panel is set to automatic mode upon first start-up.
At subsequent start-ups, the panel will be set to the mode last saved before the last shut-
down.
Below is a description of the various features found on the unit. All parameters described
initially have factory set values.
Note: If the necessary probes are not present, the unit will operate continuously as a normal
fan at the initially set speed.
8