RugGear RG880 Guia De Inicio Rapido página 7

Note:
EN
Make sure all gaskets are closed to ensure water and dust tightness.
8.2. Activate Esim (optional function, the standard version does not support Esim)
You can activate the eSIM in several ways:
1. Via the Android Setup Wizard during initial device setup:
Scan the eSIM QR code that you have received from your service provider or manually
enter the eID that you have received from your service provider.
2. Via the settings menu of the smartphone:
> Settings > Network & Internet > Mobile network (add Network) > Download SIM > scan
(or manually enter) eSIM QR code that you have received from your service provider.
8.3 Insatll and disassemble the Waist clip
As is shown
8.4. 13-pin interface
Loosen the screw on the 13-pin interface cover using the screwdriver. Remove the cover as
shown.
Connect the plug of the 13-pin accessory to the interface as shown.
Hand-tighten the screws using the Screwdriver ;
Check that the plug is seated correctly and securely.
8.5. CHARGING
RG880 supports 9V/2A or 5V 3A charging, Only use RugGear wide licensed chargers and
cables because unlicensed products may cause battery explosion or damage your device.
The device must only be charged in an ambient temperature range of +0°C to +45°C. The
normal operating temperature of this mobile phone is -10°C to 50°C.
The RG880 provides charging contacts on the rear side to charge the device via the
Desktop Charger (optional accessory). The Desktop Charger also provides a second
charging slot for spare batteries (optional accessory).
7