ACD GRUPPE Voxter Elite+ Set Instrucciones Breves página 10

4.1.6 Status of the Voxter Elite Charger LEDs
The Voxter Elite Charger status LEDs are located on the top of the charger.
Figure 7: Status of the Voxter Elite Charger LEDs
The first LED shows a red light if a Voxter Elite+ is being charged. The LED shows a green light once the
Voxter Elite+ is fully charged. The orange light indicates that the charger is ready for use.
The second LED shows a red light if a spare battery is being charged. The LED shows a green light once the
spare battery is fully charged. The orange light indicates that the charger is ready for use.
Unintended use of the interfaces should be avoided.
ATTENTION
5 Cleaning and Maintenance Information
Turn off the device before starting any cleaning or maintenance
process!
Do not use any corrosive chemicals, cleaning solutions or strong
cleaning agents in order to clean the voice client, battery and
charger.
ATTENTION
All components must be disposed of properly at the end of their
technical lifetime.
ATTENTION
Clean the device when dirty and by placing it firmly onto a surface (e.g. table). This ensures a secure hold
and the device cannot slip out of your hand during the cleaning process.
5.1 Charging and Communication Contacts
If transfer problems occur, clean the charging and communication contacts with a soft, moist cloth.
When dealing with the Voxter Elite Charger, the power plug must be disconnected beforehand.
Voxter Elite+ Set_Brief Overview_Resumen breve_FCC_V1.03_en_es
1
2
10 / 26