ACD GRUPPE Voxter Elite+ Set Instrucciones Breves página 5

3.1 Prior to the initial Commissioning of the Voxter Elite+
In order to ensure that the battery inserted into the device at the factory is fully charged, insert the device into
the supplied charger (if included in the scope of delivery), also see Section 0. Using the supplied power
supply unit, connect the charger to the mains, also see Section 0.
The battery charging process has been completed when the LED is green.
You can now use the Voxter Elite+.
You can see the battery charging process in Figure 2.
Only original ACD power supply units and ACD-approved batteries
may be used for the operation of the Voxter Elite+ and the Voxter
Elite Charger. The utilization of non-approved components can
lead to the destruction of the device. Do not use the ACD-approved
ATTENTION
components with a third-party device. Remove the battery from the
device if it is not used for an extended period of time.
The Voxter Elite+ battery is a lithium ion battery pack. Lithium ion
battery packs can explode if exposed to fire. Do not disassemble
the battery pack and do not expose it to fire or heat (greater than
ATTENTION
140 °F).
Prior to each use, the voice client, battery, the charger and the
connection cables must be inspected for damages. Damaged parts
must be replaced. Please contact ACD in either case.
ATTENTION
Please consult a doctor or the manufacturer of the medical devices
before using the voice client and the associated components in
the vicinity of medical devices (e.g. pacemakers).
ATTENTION
Figure 2: Charging Process
Voxter Elite+ Set_Brief Overview_Resumen breve_FCC_V1.03_en_es 5 / 26