Errors Description; Electrical Diagram - Electrex DC 164S Manual De Instrucciones

8. ERRORS DESCRIPTION

Er1 - Equipment overheating - Do not switch off the machine. Allow the equipment to ventilate
until the error disappear.
Er6 – Phase failure - Switch off the power supply to the machine and the corresponding
machine circuit breaker.
Check the connection of the power cable to the electrical installation on all 3 phases.
Er11 – Communication from the machine to the external device - Switch the machine off and on
again. If the error persists, contact your supplier.

9. ELECTRICAL DIAGRAM

DC 164-204
15