Publicidad
Idiomas disponibles
Idiomas disponibles
DESCRIPTION OF THE APPLIANCE
1: Soleplate
2: Spray Nozzle
3: Water Reservoir Lid
4: Steam Select Lever
5: Shot of Steam Button
6: 360º Swivel Cord
7: Handle
8: Wide Heel Rest
9: ON/OFF Indicator Light
10: Spray Trigger
11: Temperature Control Dial
12: See-Through Water Reservoir
-4-
BEFORE FIRST USE
• When using the Iron for the first time, test it on a piece of old cloth to
be sure that the Soleplate and the Water reservoir are clean.
• It is possible that the Iron will discharge some smoke or give off a
slight odor dturing it is first usage. This is due to the initial heating
of the materials used. This is completely normal and will stop shortly
afterwards.
• When not ironing, always have the Steam Select Switch turned to the
close position
.
•
INSTRUCTIONS FOR USE
CHOOSING THE RIGHT WATER
• This Steam iron may be used by normal tap water. However, if the water
if the region in which you live is especially hard, it is recommended to
use distilled water to prolong the life of your iron.
• Do not use water that has been desalinated with chemicals.
INSTRUCTIONS FOR USE
1. Turn off the Iron and disconnect the plug
from the electrical wall outlet before filling the
Iron with water.
2. Turn the Steam Select Switch to the closed
position.
3. Set the Iron in the position indicated below
(figure 2) and fill it with water, no higher than
the Max fill level shown on the See-Through
Water Window.
figure 2
-5-
Publicidad
