cecotec CLEANFRY LUXURY 3000 Manual De Instrucciones página 19

ENGLISH
Buttons and light indicators
Power button: Light & on/off/confirmation
Mode button: Light & mode setting
Time button: Light & time setting
Temperature button: Light & temperature setting
Standby mode
The deep fryer will emit a single "beep" for 1 s and the display will show "P001". The Mode
button light will also flash.
Mode selection
Press the Mode button in Standby mode to select the desired mode. The display will show
1.
programmes 1 to 5 (P001-P005).
2. Press it again and the display will show "P001".
Note
Each mode has a matching preset time and temperature, please check the section "Preset
Time and Temperature".
3. Press the Temperature button in Standby mode. The display will show the preset
temperature and the temperature button light will turn on.
Press the Temperature button once to increase the temperature by 5 °C.
Use the Temperature button to adjust the temperature from 110 °C to 190 °C.
When the temperature selection reaches 190 °C, press the Temperature button again and the
temperature will revert back to 110 °C.
4. Press the Time button in Standby mode and the display will show the preset time and the
corresponding time button light will turn on.
Press the Time button once to increase the time by 1 min.
Use the Time button to adjust the time from 1 min to 99 min. When the time selection
reaches 99 min, press the button again and it will revert back to 1 min.
Shape
NN:XX (N refers to min, X refers to no display).
Throughout the whole process, the digital display will show 0.5 s which means the appliance is
in operation. 0.5 s will flash on the display indicating that it has stopped operation.
CLEANFRY LUXURY 3000/BLACK/DARK
36
Heating mode
1. After selecting a mode, press the ON/OFF button and the display will show the current oil
temperature. The buttons will light up. The device will start the heating process.
2. During the heating process, press the Mode button. Notice that there is no change on the
display or the setting. Press the Time button and the display will show the preset time.
Press the Temperature button to show the preset temperature.
3. During this process, the buttons will remain on and the display will not flash.
Note
The display will show the current temperature for 5 s without you having to press any button.
Waiting mode
Once the oil reaches the preset temperature then the deep fryer will "beep" (beep 0.3 s, stop
0.3 s). The panel will display the current temperature. Should the deep fryer be left without any
selection for 1 min then it will automatically switch to standby mode.
Frying mode
After entering the Waiting mode, press the ON/OFF button. The deep fryer will stop
1.
beeping. The set time will show up on the display. The ready light will turn on.
Time format
N:XX or NN:nn (N refers to the remaining minutes, n refers to the remaining seconds, X refers
to no display). Time precision requirements ±3 %.
2. During the frying process, press the Time button and the display will show the preset time.
The time button will light up. Press the Temperature button and the display will show the
preset temperature. Should the deep fryer be left without any selection for 5 s then it will
automatically switch to the countdown timer.
3. Once the fryer reaches the required preset temperature, the heating element will switch
off. If the oil temperature drops to lower than the preset temperature 7±3 °C, the heating
element will automatically turn on again to reach the required preset temperature. The
display will show the countdown timer.
4. Once the deep fryer has reached the end of its preset time, it will emit ten beeps (beep 2 s,
stop 1 s). It will stop heating and then enter Standby mode.
5. Press the ON/OFF button when the fryer is working, and the deep fryer will stop the heating
process. The display will show the default code and switch to setting mode.
ENGLISH
CLEANFRY LUXURY 3000/BLACK/DARK
37