Publicidad
Idiomas disponibles
Idiomas disponibles
not exceed the storage period indicated by the food manufacturer.
Switching off your appliance
If the appliance needs to be switched off for an extended period, the following steps
should be taken to prevent it from growing mold.
1. Remove all food.
2. Remove the power plug from the mains socket.
3. Clean and dry the interior thoroughly.
4. Ensure that all the doors are wedged
5. Open slightly to allow air to circulate.
TROUBLESHOOTING
If you experience a problem with your appliance or are concerned that the appliance
is not functioning correctly, you can carry out some easy checks before calling for
service, please see below.
Warning! Don't try to repair the appliance yourself. If the problem persists after you
have made the checks mentioned below, contact a qualified electrician, authorized
service engineer or the shop where you purchased the product.
Problem
Appliance is
not working
correctly
Odors from the
compartments
The motor runs
continuously
A layer of frost
occurs in the
compartment
Possible Cause & Solution
Check whether the power cord is plugged into the power outlet
properly.
Check whether the "Power" function is on by pressing the "power"
button for 1 second.
Check the fuse or circuit of your power supply, replace if necessary.
It is normal that the freezer is not operating during the defrost cycle,
or for a short time after the appliance is switched on to protect the
compressor.
The interior may need to be cleaned.
Some food, containers or wrapping cause odors.
Other unusual noises are due to the reasons below and may need you
to check and take action:
• The cabinet is not level.
• The back of the appliance touches the wall.
• Bottles or containers fallen or rolled.
Check that the air outlets are not blocked by food and ensure food
is placed within the appliance to allow sufficient ventilation. Ensure
that the door is fully closed. To remove the frost, please refer to the
"Cleaning and Care" section.
15
Publicidad
