Publicidad
Idiomas disponibles
Idiomas disponibles
• Never operate the trimmer with missing or
broken guards or shields or without guards or
shields in position.
• Before using the machine and after impact,
check for signs of wear or damage and repair if
necessary
• Wait until the spool line has completely
stopped before touching it. The spool line
continues to rotate after the trimmer is
switched off; a rotating wire can cause injury.
• Operating the trimmer in wet grass decreases
the efficiency of performance.
• Switch off when transporting the trimmer to
and from the area to be worked on.
• Switch on the motor only when the hands and
feet are away from the cutting means.
• Have the trimmer repaired only by an
authorized customer service agent.
• Always ensure that the ventilation slots are
kept clear of debris
• Store the machine in a secure, dry place out
of the reach of children. Do not place other
objects on top of the machine
• Do not operate the machine without the wire
attachment fitted
• Do not force the appliance - let it work at the
rate for which it was intended.
Never replace the non-metallic cutting means with
metallic cutting means.
Don't touch moving hazardous parts before the
machine is disconnected from the mains and the
moving hazardous parts have come to a complete
stop. Always wear substantial footwear and long
trousers while operating the machine. Disconnect
the supply (e.g. remove the plug from the mains or
remove the disabling device):
1) whenever the machine is left by the user;
2) before clearing a blockage;
3) before checking, cleaning or working on the
machine;
4) after striking a foreign object to inspect the
machine for damage;
5) if the machine starts to vibrate abnormally, for
immediately check.
• Always ensure the guards are fitted when
using the tool.
• Check the cable for damage before starting
work and replace if necessary.
• Inspect and maintain the trimmer regularly.
Have the trimmer reppaired only by an
authorised repairer.
• After extending new cutter line or replacing
the spool line. Always return the trimmer to its
normal operating position before switching on.
• Periodically inspect the condition of the cutting
head. If the spool is damaged, switch off,
remove the plug from the power point and
replace the spool.
• Do not use the machine to cut grass, which
is not on the ground. For example, do not cut
grass, which is on walls or rocks.
• Do not cross roads or gravel paths with
machine still running.
• Only use the machine according to the
instructions given in this manual.
• Do not extend the trimming line beyond the
guard and do not operate the trimmer without
both lines extended and proper line installed.
• Check regularly that the nuts, bolts and screws
are tight.
Residual risks
Even when the power tool is used as prescribed it
is not possible to eliminate all residual risk factors.
The following hazards may arise in connection
with the power tool's construction and design:
a) Health defects resulting from vibration
emission if the power tool is being used
over longer period of time or not adequately
managed and properly maintained.
b) Injuries and damage to property to due to
broken accessories that are suddenly dashed.
Warning! This power tool produces an
electromagnetic field during operation.
This field may under some
circumstances interfere with active or
passive medical implants. To reduce the
risk of serious or fatal injury, we
recommend persons with medical
implants to consult their physician and
the medical implant manufacturer before
operating this power tool.
7
Publicidad
