Safety Instructions; General Guidelines; Hardware Installation; User Manual - Velleman CAMIP4 Manual Del Usuario

1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its
lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted
municipal waste; it should be taken to a specialized company for recycling. This device
should be returned to your distributor or to a local recycling service. Respect the local
environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into
service. If the device was damaged in transit, do not install or use it and contact your dealer. Damage
caused by disregard of certain guidelines in this manual is not covered by the warranty and the
dealer will not accept responsibility for any ensuing defects or problems.

2. Safety Instructions

Keep the device away from children and unauthorised users.
Risk of electric shock when opening the cover.
DO NOT disassemble or open the cover. There are no user-serviceable parts
inside the device.
Refer to an authorized dealer for service and/or spare parts.

3. General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
• Protect this device from shocks and abuse. Avoid brute force when operating the device.
• Protect the device against extreme heat, dust and moisture.
• Familiarise yourself with the functions of the device before actually using it.
• All modifications of the device are forbidden for safety reasons.
• Only use the device for its intended purpose. Using the device in an unauthorised way will void the
warranty.
• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and
the dealer will not accept responsibility for any ensuing defects or problems.
4. Features
• connect to the IP camera from anywhere in the world by using the software and a unique camera
ID number and password
• view live images and record from any PC in the world
• easy to use "CamView" software to view up to 16 cameras at the same time
• manually started, scheduled or motion triggered (software) recording
• adjustable bandwidth to balance between image resolution and internet access speed

5. Hardware installation

Refer to the illustrations on page 2 of this manual.
• Choose the location for the camera, keeping following guidelines in mind:
do not install the camera in locations where extremely high or low temperatures or excessive
o
vibrations may occur.
avoid mounting the camera near high electro-magnetic fields.
o
do not aim the camera at the sun or other extremely bright objects or reflections (e.g. metal
o
doors).
• Use the mounting bracket [7] to determine the location of the mounting holes. Drill the holes and
secure the bracket [7] using 3 screws.
• Attach the camera to the mounting bracket [7] with the camera bolt [5]. The camera has two
mounting holes, make sure to use the one that provides an upright image. This depends on the type
of mounting (ceiling or wall). When using the top hole (ceiling mounting or camera hanging on
bracket), place the sunshield [4] over the camera bolt [5] before mounting the camera. When using
17/07/2009
CAMIP4

User manual

3
Rev. 02
© 2008 Velleman nv