Eaton TRIPP LITE Serie Guia De Inicio Rapido página 4

USB Device Charging
Notes:
• The Smart LED (the first LED on the power bank) will change from blue to
green and blink repeatedly to indicate a device placed on the charging
pad is actively being charged.
• Only one charging output may be used at once. If you are using one
charging output and wish to switch to the other, you must disconnect
your device and wait 60 seconds before attempting to use the other
output.
1. Using the included USB Type-C to Type-A cable, connect
the USB-C connector to the USB-C port of the power bank
and the USB-A connector to the USB-A port of a compatible
power adapter (sold separately).
4