Publicidad
Idiomas disponibles
Idiomas disponibles
CEILING MOUNTING
Wall/ceiling
Mounting
Bracket
Bolt
INSTRUCTIONS FOR USE
1. Place the base on a smooth and dry surface.
2. Connect the cable to a 220-240V~ 50Hz socket.
3. Press the ON/OFF button and select the desired speed:
▶By means of the 3-speed system you can start the fan:
• POSITION 0: OFF position
• POSITION 1: low speed
• POSITION 2: medium speed
• POSITION 3: high speed
REMOTE CONTROL
OFF
Switch on and
Increase speed
Activation
Lateral
Movement
IMPORTANT NOTES
▶Place the fan on a flat, dry surface.
Instruction manual
Nut
Washer
Fan grip
Grill
Turn on
And slow
Down
Timer
▶Before connecting the device to the mains, make sure that the
switch is in the "0" position.
▶Plug the power cord into the mains socket 220-240V~ 50Hz.
▶If you do not use the fan for a long time, unplug the power cord from
the socket.
▶Never attempt to disassemble the device where the motor is located.
▶If you notice any abnormality (such as unusual noise from the fan),
switch off the device and unplug it immediately.
▶Make sure that no objects or liquids enter the interior of the fan
through any openings.
▶The fan should only be used in dry environments.
▶Protect the device from dust, moisture, sunlight and direct heat.
TILT ADJUSTMENT
To change the tilt angle of the fan head, move the fan head to the
desired angle.
CLEANING AND MAINTENANCE
▶Make sure that the appliance is switched off before cleaning.
▶Clean with a soft damp cloth, without detergent, aggressive liquids
or solvents.
▶Do not immerse the fan in water or any other liquid.
▶If the fan is not to be used for a long period of time, protect the fan
and store it or after cleaning it in a dry place.
Ref. 33520
ES
PT
EN
FR
Publicidad
