Publicidad
Idiomas disponibles
Idiomas disponibles
BEFORE THE FIRST USE
•
Take the appliance and accessories out the box. Remove the
stickers, protective foil or plastic from the device.
•
Before using your appliance for the first time, wipe off all
removable parts with a damp cloth. Never use abrasive products.
•
Place the device on a flat stable surface and ensure a minimum
of 10 cm. free space around the device. This device is not
suitable for installation in a cabinet or for outside use.
•
When using, plug the power cable into the socket. (Note: Make
sure the voltage which is indicated on the device matches the
local voltage before connecting the device. Voltage 220V-240V
50Hz).
INSTALLING THE BATTERY TO THE REMOTE CONTROL
The remote control uses a cell battery, type CR2025(3V) To install
the battery to the battery carriage-
•
Use your thumb to push the child proof release tab to the right.
•
Pull the battery carriage out.
•
Place the battery into the carriage and slide the carriage back
into the remote control.
FILLING THE WATER RESERVOIR
•
Open the water reservoir located at the back of the unit.
•
Fill the water reservoir with clean, cold water. Make sure that the
water level is between the MIN (minimum) and the MAX
(maximum). See the water level indicator at the front the water
reservoir.
•
To increase the cooling effect insert the cooled ice pack inside of
the water reservoir.
•
Pay attention to the water level when using the ice packs, the
water level must never exceed the maximum level allowed.
WI-FI PAIRING
•
To pair the device with Wi-Fi long press the [ON/OFF] icon for 6
seconds until the wi-fi signal flashes on the screen and you hear
3 beeps.
USING THE DEVICE WITH PRINCESS HOME APP
Download the correct version of the Princess Home app via our
website princesshome.eu/nl-nl/princess-home-app or use QR:
Instruction manual
EN
7
Publicidad
