Levenhuk Wezzer PLUS LP140 Guia Del Usuario página 11

Atmospheric pressure
• Press the BARO/—/ (Pressure/—/Wi-Fi) button in normal mode to switch between absolute and relative pressure.
Wind
• Press the WIND/+ button in normal mode to switch between average wind speed, gust wind speed, and wind direction.
Precipitation
• Press the RAIN button in normal mode to switch between Precipitation Rate (per hour), Rainfall, Daily Precipitation, Weekly Precipitation,
Monthly Precipitation, and Total Precipitation.
• Press and hold the RAIN button for 2 seconds to reset the rainfall total.
Temperature index
• Press the TEMP/ (Temperature/Alarm) button in normal mode to switch between different indexes: Feels like, Heat Index, Wind Chill
Index, Dew Point, Outside Temperature.
Weather forecast
The built-in barometer monitors changes in atmospheric pressure and, based on the data obtained, generates a weather forecast.
Sunny
Rainy
Maximum/minimum values
• Press the MAX/MIN button in normal mode to switch between maximum values and minimum values. If no action is performed within
10 seconds, the weather station will automatically return to normal mode.
• In max/min mode, use:
— TEMP/ (Temperature/Alarm) button to display temperature values in the following order: Feels like > Wind chill > Heat index >
Dew point > Outdoor temperature.
— RAIN button to display precipitation values in the following order: Total amount of precipitation > Daily amount of precipitation >
Weekly amount of precipitation > Monthly amount of precipitation.
— BARO/—/ (Pressure/—/Wi-Fi) button to display absolute and relative pressure values.
— WIND/+ button to display wind speed and wind gust speed values.
— CHANNEL button to display indoor temperature and humidity.
• To reset the maximum value, hold the MAX/MIN button for more than 2 seconds while the maximum values are displayed.
• To reset the minimum value, hold the MAX/MIN button for more than 2 seconds while the minimum values are displayed.
Alert setup
• To SET the alert in normal mode, hold the ALERT button for more than 2 seconds to enter the alert setup mode.
• Press the WIND/+ and BARO/—/
• Press the ALERT button to turn the alert on/off.
• Press ALERT button to confirm and move to next setting.
• Alert setup order: High Indoor Temperature Alert > Low Indoor Temperature Alert > High Indoor Humidity Alert > Low Indoor Humidity Alert >
High Outdoor Temperature Alert > Low Outdoor Temperature Alert > High Outdoor Humidity Alert > Low Outdoor Humidity Alert > High Wind
Speed Alert > High Wind Gust Speed Alert > Low Pressure Alert > High Intensity Precipitation Alert > High Daily Precipitation Alert.
or is displayed when an alert is on.
• To exit the alert setup mode, press the
When an alert is triggered, the ringer will sound for one minute and the corresponding alert icon and weather reading will flash.
• To turn off the alert sound, press the
ATTENTION! If an alert automatically turns off after one minute rather than being turned off manually, the corresponding alert icon and
readings will continue to flash until the readings move out of the alert range. The weather alert will trigger again once the readings fall
within the alert range.
buttons in alert setup mode to adjust the value up or down.
(Backlight/Snooze) button.
(Backlight/Snooze) button.
Partly cloudy
Heavy rain
11
Cloudy
Snowy