Profi Cook PC-ES 1267 Manual De Instrucciones página 21

Problem
The pump makes loud
noises.
The espresso comes out at
the edge of the filter holder.
The espresso coffee is
too cold.
The coffee foam is slightly
discoloured (the coffee
comes out quickly).
The coffee foam is darkly
discoloured (the coffee
comes out slowly).
The espresso is not
creamy enough.
The milk is not frothed.
Technical Data
Model:..................................................................PC-ES 1267
Power supply:.....................................220 – 240 V~, 50 – 60 Hz
Power consumption: ................................................... 1100 W
Filling quantity: .............................................approx. 1.8 litres
Protection class: .....................................................................
Pressure: .......................................................................20 bar
Net weight: .......................................................... approx. 4 kg
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
PC-ES1267_IM
Possible Cause
The water tank is empty.
The water tank is not inserted correctly,
the valve is not open.
Air has entered the water circuit.
The filter holder was not inserted cor-
rectly or was not closed tightly enough.
There is too much coffee powder in the
filter insert.
There is coffee grounds residue on the
rubber seal of the brew head.
Ground coffee has been stored for a
long time in a hot, humid place.
The cups were not preheated.
The coffee powder is too coarse or it
has not been distributed evenly.
There is too little coffee powder in the
filter insert.
The coffee powder is too fine or has
been pressed on too firmly.
There was too much coffee powder in
the filter insert.
Unsuitable espresso powder was
chosen.
The milk is unsuitable.
The milk is not cold enough.
The steam nozzle is dirty.
Remedy
Switch off the Appliance!
Fill the water tank with fresh water.
Press the water tank firmly on the upper side until
it locks into place.
Vent the appliance as described under "Initial
Start-up".
Stop the Brewing Process!
Insert the filter holder correctly as described under
"Assembly / Disassembly of the Filter Holder".
Remove any excess coffee powder.
Switch off the appliance and let it cool down.
Clean the rubber seal as described.
Use fresh coffee powder.
Rinse the cups with hot water.
Use the tamper supplied to help you.
Depending on the filter insert used (1 cup or
2 cups), fill one or two measuring spoonfuls into
the filter ice pack (one measuring spoonful =
1 cup).
Loosen the coffee powder. Distribute it evenly and
press it only lightly with the tamper.
Use less coffee powder. Depending on the filter
insert used (1 cup or 2 cups), fill one or two
measuring spoonfuls into the filter ice pack (one
measuring spoonful = 1 cup).
Change the brand if necessary.
Use milk with a fat content of at least 3.5 % fat.
Use chilled milk.
Clean the steam nozzle as described.
This appliance has been tested according to all applicable,
current CE directives and built according to the latest safety
regulations.
Disposal
Meaning of the "Dustbin" Symbol
Protect our environment: do not dispose of elec-
trical equipment in the domestic waste.
Please return any electrical equipment that
you will no longer use to the collection points
provided for their disposal.
21
22.11.23