Publicidad
Idiomas disponibles
Idiomas disponibles
The operating LED () goes out as soon as the built-in rechargeable battery is fully
charged.
An acoustic signal will sound if the battery charge level is too low and the
battery needs to be charged.
Once the battery is fully charged, remove the USB cable.
.. Switching on the speaker
Switch on the speaker by pressing and holding the
Always switch the speaker off when not in use to avoid unnecessary dis-
charge of the battery.
.. Switching off the speaker
Switch off the speaker by pressing and holding the
onds.
. Connecting the device via Bluetooth
In Bluetooth mode, you can receive wireless audio signals from an external Bluetooth-ena-
bled output device. Make sure the two devices are not more than metres apart.
You can only pair one Bluetooth device with the speaker.
.. Bluetooth-enabled output device
To connect a Bluetooth-enabled output device, proceed as follows:
Switch on the speaker by pressing and holding the
The operating LED () flashes blue quickly and the device is in search mode.
The device automatically attempts to connect to the last output device it was
connected to via Bluetooth. If this is not possible, the Bluetooth speaker sends
its device identification via Bluetooth.
Now, switch on the Bluetooth function on your output device and enable search mode
to pair the two devices with each other.
You will find more information about the Bluetooth function of your output de-
vice in its user manual.
The device name SCBL A of the speaker will be displayed as soon as the
signal is found.
() button for seconds.
() button for approx. sec-
®
() button for seconds.
English -
Publicidad
