Silvercrest SCBL 5 A1 Guía Breve página 19

 When using conventional tea lights, always allow the glass holder
and the tea light within it to cool down completely before chang-
ing the tea light.
NOTICE!
Material damage!
Conventional candles may cause intense heat within the
glass holder and leaking candle wax may damage the de-
vice.
 Use only the supplied tea light, a similar LED tea light or
a suitable conventional tea light.
. LED tea light
.. Switching the LED tea light on or off
 Slide the On/Off switch () on the bottom of the tea light to the ON position to switch
the tea light on.
 Slide the On/Off switch () on the bottom of the tea light to the OFF position to switch
the tea light off.
.. Replacing batteries
The battery compartment is on the bottom of the tea light.
 Loosen the safety screw on the battery compartment cover ().
 Open the battery compartment by pushing the locking tab towards the centre of the
tea light and lifting the cover ().
 To close it, insert the cover () again, making sure that the groove of the cover engag-
es in the recess in the tea light base.
 Push the battery compartment cover () back into the tea light base until it clicks into
place.
 Insert the safety screw again and tighten it hand-tight.
NOTICE!
Possible material damage!
Incorrectly inserted batteries can cause damage to the de-
vice.
 Pay attention to the polarity when inserting the batteries.
English - 