.. Cleaning equipment parts
NOTICE!
Possible damage to the appliance!
Delicate surfaces can be damaged if handled incorrect-
ly.
Never use acidic, abrasive or granular cleaning
agents or cleaning agents containing acetic acid,
soda or solvents. These may damage the appliance
surfaces or the printing on it.
WARNING! Do not use any flammable liquids to clean
the appliance or appliance parts. An accumulation of
gas can lead to explosions.
Do not put the ice container or the scoop in the dish-
washer.
Clean the ice container and scoop with warm water and a mild detergent such
as dishwashing liquid. Use a soft cloth. Dry the parts thoroughly with a lint-free
cloth.
Clean both water tanks with a cloth slightly dampened with a vinegar solution.
Then dry both water tanks thoroughly with a lint-free cloth.
Wipe the housing down with a slightly damp cloth.
Check regularly that the filter screen of the drinking water tank is not blocked.
Clean contamination from the filter screen of the drinking water tank using a
soft brush.
.. Automatic cleaning
Fill the lower water tank and the drinking water tank up to the MAX mark. Do
not fill above the mark.
In standby mode, press the
The indicator light
During the cleaning process, water is continuously pumped from the lower water
tank into the upper drinking water tank for 7 minutes. The water flows back into the
lower water tank through the overflow opening in the drinking water tank. If the
sensor detects that there is not enough water in the lower tank, the cleaning pro-
cess is paused and the indicator light
126
button to start automatic cleaning.
and the button
illuminate.
flashes.