. Troubleshooting
The product left our warehouse in perfect condition. If you do identify a problem,
first try to solve it using the solutions offered in the following table. If you do not
succeed, contact our customer service team.
Problem
Compressor makes
loud noises.
Indicator light
flashes
Indicator light
flashes
button does not
flash.
Work steps correct,
no ice production
Indicator lights
,
,
and
flash simultaneously
If the compressor does not work due to a low water level
container
start with a delay of 3 minutes after being started again.
128
Possible cause
The mains voltage isn't
right.
Water level too low.
The container is full or
the temperature is too
low.
No power or fuse is
faulty.
•
Coolant leakage
•
Compressor faulty
•
Engine faulty
Equipment parts are at
risk of freezing during
ice production.
or power failure, once the error has been resolved it will
Solution
Disconnect the appliance
from the mains power and
wait until the mains fluctu-
ation is resolved.
Refill water up to the MAX
mark at most.
Press the button
continue ice production.
Empty the ice container.
Press the button
continue ice production.
Check the mains plug/fuse.
Contact customer service.
Disconnect the mains plug
immediately.
Wait four hours for the ice
in the evaporator to melt.
Only then can you plug
the appliance back into
the socket and make ice
nuggets.
to
to
, full ice