Publicidad
Idiomas disponibles
Idiomas disponibles
Loading / Removing Narrow Crown Staples
WARNING
others when loading staples .
could result in possible serious personal injury.
WARNING
with this tool .
The use of any other staples
can result in tool malfunction, leading to
serious injuries.
WARNING
trigger activated .
possible serious personal injury.
To Load Staples (Fig . 5a & 5b)
a. Remove the battery pack from the tool, if
attached.
b. With the nose of the tool pointed away from
you, squeeze the magazine release button
located at the rear of the magazine and slide
the magazine open.
c. Slide the crown staple strip fully into the
channel of the magazine with staple legs
pointing outside.
d. Push the magazine closed until it securely
snaps into place.
e. Make sure that the magazine is securely
locked in place.
f. Reattach the battery and restart the stapler by pressing the trigger switch.
NOTE: You can observe the number of remaining staples through the staple indicator window
and load more staples as needed.
To Remove Narrow Crown Staples
a. Remove the battery pack from the tool.
b. Squeeze the magazine release button located at the rear of the magazine and slide the
magazine open.
c. Remove the staples.
d. Close the magazine and make sure that it is securely locked in place.
14
Keep the tool pointed
away from yourself and
Failure to do so
Use only the staples
recommended for use
Never load staples with
the workpiece contact or
Doing so could result in
Fig . 5a
Staple Indicator
Window
Magazine-release
Button
Fig . 5b
Staple Legs
Staples
Magazine
2
3
4
1
Publicidad
