Publicidad
Idiomas disponibles
Idiomas disponibles
Removing a Jammed Staples
(Fig . 9)
a. Remove the battery pack from the tool.
b. Press the magazine release button and
remove the staples from the magazine.
Remove the jammed staples from the
magazine using a flat head screwdriver or
pliers (not included) if necessary.
c. Reload the staples and close the magazine.
d. Reattach the battery pack and restart the
tool by pressing the trigger switch.
NOTE: Driving the staples too deeply into the
material, excess debris, or jammed staples
may lead to a driver blade being stuck at its
bottom position.
The driver blade can usually be returned to its operating position by depressing the work contact
element against a scrap piece of wood and squeezing the trigger.
Fig . 9
17
Publicidad
