Publicidad
Idiomas disponibles
Idiomas disponibles
To reduce the risk of injury,
Do not use the saw hook if it
appears damaged or deformed. This could re-
sult in unstable hanging and the tool unexpect-
edly falling.
To attach the Saw Hook 22:
Place the saw hook on the base as shown and
secure it in place with the screws S. Observe
the order of the washers W and lock washers
L (Fig. 5).
To remove the Saw Hook 22:
Remove the screws S, washers W, and lock
washers L (two of each) using a phillips head
screwdriver (not included). Store the parts in a
safe place (Fig. 5).
Inserting and Removing
Battery Pack
Use only Bosch or AMPShare
batteries recommended in
the battery/charger list, included with your
tool. Use of any other types of batteries may re-
sult in personal injury or property damage.
Ensure the switch is in the
off position before inserting
battery pack. Inserting the battery pack into
power tools that have the switch on invites ac-
cidents.
(Fig. 6, 12)
To insert the battery pack:
1. Set Lock-Off Button 1 to the locked position.
See "LockOff Button" on page 12.
2. Slide charged Battery Pack 14 into the hous-
ing until the battery pack locks into position
(Fig. 6).
Your tool is equipped with a secondary locking
latch to prevent the battery pack from completely
falling out of the handle, should it become loose
due to vibration.
To remove the battery pack:
1. Press the Battery Pack Release Button 13 and
slide the Battery Pack 14 from the housing.
2. Press the Battery Pack Release Button 13
again and slide the Battery Pack 14 complete-
ly out of tool housing.
10
160992A8P6 GCB18V-5 202309.indd 10
page heading
Assembly
Fig. 5
22
Fig. 6
14
13
S
L
W
9/8/23 9:00 AM
Publicidad
