Publicidad
Idiomas disponibles
Idiomas disponibles
GFCI and personal protection devices like elec-
trician's rubber gloves and footwear will further
enhance your personal safety.
Keep handles dry, clean and free from oil and
grease. Slippery hands cannot safely control the
power tool.
Develop a periodic maintenance schedule for
your tool. When cleaning a tool be careful not
to disassemble any portion of the tool since
internal wires may be misplaced or pinched or
safety guard return springs may be improperly
mounted. Certain cleaning agents such as gaso-
line, carbon tetrachloride, ammonia, etc. may
damage plastic parts.
Ensure the switch is in the off position before
inserting battery pack. Inserting the battery
pack into power tools that have the switch on
invites accidents.
The power tool is intended for making cuts in plastic, metal and rubber while resting firmly against
the material being sawn.
Model Number
Voltage rating
No load speed
Blade Size
Permitted battery temperature during charging
Permitted ambient temperature
during operation and storage
Recommended ambient
temperature during charging
Capacities
Round stock
Rectangular
Please refer to the battery/charger list, included with your tool.
NOTE: For tool specifications refer to the nameplate on your tool.
160992A8P6 GCB18V-5 202309.indd 5
Additional Safety Warnings
drilling, and other construction activities con-
tains chemicals known to cause cancer, birth
defects or other reproductive harm. Some ex-
amples of these chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement
• Arsenic and chromium from chemically-
Your risk from these exposures varies, depend-
ing on how often you do this type of work. To
reduce your exposure to these chemicals: work
in a well ventilated area, and work with ap-
proved safety equipment, such as those dust
masks that are specially designed to filter out
microscopic particles.
Intended Use
Specifications
Battery Packs / Chargers:
SAVE THESE INSTRUCTIONS
Some dust created by power
sanding, sawing, grinding,
and other masonry products, and
treated lumber.
GCB18V-5
18 V
100-380 ft/min (SFPM)
44⅞ x ½" x 0.02" (1140 x 13 x 0.5 mm)
+32...+113°F (0...+45°C)
-4...+122°F (-20...+50°C)
+32...+95°F (0...+35°C)
.⌀5" (⌀127 mm)
5 x 5" (127 x 127 mm)
5
5
9/8/23 8:59 AM
Publicidad
