ivoclar PrograScan PS7 Instrucciones Resumidas página 5

Step 3
Initial operation
After you have set up and connected the scanner correctly,
you can start using it.
1. Switch on PC
Wait until the PC has completely booted up before you switch
on the scanner.
2. Switch on scanner
Switch on the scanner and open the scan software.
3. Calibrate scanner
Calibrate the scanner in the scan software before first use.
We recommend you calibrate the scanner on a regular basis (1x per week).
Only the systems supplied by us guarantee unrestricted
functionality. Third-party systems may cause errors and are not
recommended.
If you get stuck
contact our support
If you have technical questions about the scanner, please contact our technical
support. They will assist you with all their expertise.
You can also download our detailed Operating Instructions from our website.
https://www.ivoclar.com/ go to Instructions for Use.
Thank you for choosing our product.
We wish you much joy and success with it.
Customer Care
Phone 00800 7000 7080; e-mail customercare.emea@ivoclar.com
5