Publicidad
Idiomas disponibles
Idiomas disponibles
7
TROUBLESHOOTING
PROBLEM
The motor does not start when you
pull the trigger.
The product releases smoke during
operation.
The motor is on, but the blades do
not move.
Excessive noise and/ or vibration
during operation.
English
POSSIBLE CAUSE
The battery is not installed correctly.
The battery is out of power.
The product has sustained damage.
The product has sustained damage.
The blades are blocked.
The screw and nuts are not properly
tightened.
The product has sustained damage.
13
POSSIBLE ACTION
Make sure that you correctly install
the battery in the product.
Charge the battery.
1.
Immediately stop the product.
2.
Remove the battery.
3.
Consult your nearest service
center.
Do not use the product. Consult your
nearest service center.
Remove battery then clear blockage
from the blades.
1.
Stop the product.
2.
Remove the battery.
3.
Inspect for damage.
4.
Check and tighten loose
screws and nuts.
Do not use the product. Consult your
nearest service center.
EN
Publicidad
