Crivit SP-136V Modo De Empleo página 19

4. Thread the chinstrap back through the loops on the ear padding.
Operating the one-handed size adjustment system (Fig. E)
The integrated size adjustment system can be adjusted freely with a turning knob on the back
of the head:
• Smaller = turn clockwise
The correct helmet position (Fig. H)
• The helmet must always sit horizontally on your head.
• If the helmet is too far forward, this can impair your vision.
• If the helmet is too far forward, this can impair your vision.
Attaching the ski goggles (Fig. I)
1. To attach the ski goggles, open the flap at the back of the helmet.
2. Put the ski goggles in place and pull the band around the helmet.
3. Put the ski goggles in place and pull the band around the helmet.
Visor
The medium-tinted glass is suitable for normal light and cloudy weather conditions (filter
category S2). Check the visor (Fig. A, 2) regularly for defects. If the visor has become loose,
you can tighten this again by using a suitable tool on the screws at the side. You can request
the transmission curve by calling the service hotline.
Cat. Description
Colourless/slightly
0
tinted
Slightly tinted
1
Moderately
2
tinted
3
Darkly tinted
Very dark tint (not
4
suitable for driving
and road use)
PO-2024-14 K Ski- und Snowboardhelm SP-136V_CB8.indd 21 PO-2024-14 K Ski- und Snowboardhelm SP-136V_CB8.indd 21
• Larger = turn anticlockwise
Area Light transmission
of use
80 - 100
43 - 80
18 - 43
8 - 18
3 - 8
Children's Ski- And Snowboard Helmet
21
GB IE
06.06.2023 09:15:35 06.06.2023 09:15:35