Publicidad
Idiomas disponibles
Idiomas disponibles
Torque Wrench | 25 mm (1") | 300-1500 Nm
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
TECHNICAL DATA
Output Profile:
Min. Torque:
Fine Scale:
Trigger CW:
Length:
INTENDED USE
This product is designed to tighten right-hand threaded screw connections to a preset torque value.
SAFETY INFORMATIONS
•
Keep children and other persons out of the working area.
•
Do not allow children to play with this product or its packaging.
•
Do not use the product if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
Always keep a balanced and firm footing to avoid injury in unpredictable moments.
•
Choose an appropriate type of torque wrench and socket according to the torque value
required for the bolt or nut being tightened.
•
Make sure the torque wrench is set correctly before using. The torque is set on the minimum
value for shipment.
•
Always set the torque wrench to lowest value when storing the wrench.
•
Lightly oil the outside of the torque wrench if it is not to be used for a long time.
•
In order to ensure the accuracy of the torque wrench, it must be verified once a year or after
5000 uses.
•
Do not use the torque wrench as a hammer and avoid strong impact and dropping.
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of disposing of them as waste. Packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with
the environment. Contact your local solid waste authority for recycling information. Dispose
of this product at the end of its working life environmentally.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Outer square
300 Nm
10 Nm
Yes
1795 mm
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
Output Profile Size: 25 mm (1")
Max. Torque:
1500 Nm
Accuracy:
± 3 %
Trigger CCW:
No
Width:
60 mm
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 2863
Publicidad
