BGS technic 2863 Manual De Instrucciones página 4

COMPONENTS
1 Center line
2 Supplementary graduation
3 Main graduation
4 Graduation datum line
5 Locking ring
6 Locking ring locked position
7 Locking ring unlocked position
SETTING (Example 66 Nm)
1. Pull back the locking ring (5) to unlock the
supplementary graduation (2).
2. Turn the supplementary graduation (2) until 60 Nm on
main graduation (3) close to graduation datum line (4).
Now torque is set at 60 Nm.
3. Turn clockwise until 6 on supplementary graduation is
aligned with center line. Now torque is set at 66 Nm
Note: The adjusted torque value is a combination of values
on the main and supplementary graduations.
FASTEN SCREW CONNECTION
4. Set the required torque value.
5. Apply the socket on to a bolt head or nut.
6. Turn the torque wrench clockwise to fasten the bolt.
7. Stop pulling the wrench immediately when you hear/feel a "Click", this means it's already at
the torque value which you set.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed