TECHNICAL DATA
Light source type
LED type
Power supply (battery)
Power consumption
Color temperature
Luminous flux
Average life
Battery-charge time (discharged to
fully charged) in direct sunlight
PREPARING FOR USE
1. Unpack the device.
2. Remove the remaining packaging materials.
3. Check the package to ensure the package contents are complete.
4. Check the device and all supplied parts for damage. Damaged parts that do not
guarantee safe operation must be replaced.
Do not use damaged or defective equipment!
5. If parts are missing or in case of transport damage, contact the customer service
department.
TIPS / NOTES
Site selection:
• Make sure that the solar module is not in the shade during the day, it must be expo-
sed to direct sunlight (see Fig. 1). The built-in battery will only charge up su ciently
if exposed to sunlight.
LED
1x 0.5 W SMD LED
1 x rechargeable 3.2 V 18650 1000 mAh
lithium-ion battery, 3.2 Wh (replaceable)
0.2 W
4,000 K (neutral-white)
25 lumens
up to 8 hours (fully charged battery)
approx. 12 hours