Publicidad
Idiomas disponibles
Idiomas disponibles
Fig. 1: Site selection
• The device is equipped with a brightness sensor. If the ambient brightness falls
below 20 lux, the light switches on. If the ambient brightness exceeds this value, the
light switches o again. If the area around the sensor is too bright, the light is not
activated. Take these factors into account during function tests and the selection of
location.
Note: only use accessories recommended by Navaris.
Battery:
• If the LED loses its luminosity permanently despite being exposed to sunlight, re-
place the built-in battery. Follow the instructions shown (see Fig. 2) and make sure
that the battery specifications are correct (see Technical data section) and that the
polarity is correct.
1
2
Fig. 2: Battery replacement
3
4
6
5
7
8
Publicidad
